Specific Item Information: The ALP-45DP is a “dual mode” locomotive, capable of drawing power from either overhead electrical wires or its
own pair of 12-cylinder Caterpillar diesel engines. These flexible locomotives were designed to provide a one-seat
commute from NJ TRANSIT’s various diesel-only lines into the electrified territory that leads to New York City’s
Penn Station. This fulfills the requirement of not operating diesels through the North River Tunnels and within the
subterranean Penn Station complex. Produced by Bombardier Transportation in Kassel, Germany, the first
ALP-45DP locomotive entered service on NJ TRANSIT on May 30, 2012.
NJ TRANSIT’s 35 ALP-45DP locomotives are commonly seen on commuter trains traversing the Morristown Line,
Montclair-Boonton Line, Raritan Valley Line and North Jersey Coast Line. These lines do not have overhead electrical
wires for their entire length, necessitating a change of power source somewhere en-route. Previously, locomotives
or entire trainsets would have to be changed, inconveniencing riders. The ALP-45DP alleviates this need, performing
the switch from diesel to electric power (or vice versa) in just under two minutes during a routine station stop.
Model Information: This Atlas model was introduced in 2019.
Prototype History: The ALP-45DP is a type of single cab dual-mode locomotive built by Bombardier Transportation for use by NJ Transit and Exo. The ALP-45DP is an electro-diesel locomotive design derived from Bombardier's ALP-46/A and TRAXX locomotives.[35][note 3] Design requirements included mass less than 288,000 lb (131,000 kg), length less than 75 ft (22.86 m), and EPA-compliant emissions. The bodyshells of the locomotive were constructed at Bombardier's Wrocław site, the bogies at Siegen, and the alternators at Hennigsdorf factory. The locomotives were assembled at Kassel.
Road Name History: New Jersey Transit Corporation, marketed as NJ Transit (NJT), is a state-owned public transportation system serving the US state of New Jersey; along with portions of New York, Orange, and Rockland counties in New York State; and Philadelphia County in Pennsylvania. It operates bus, light rail, and commuter rail services throughout the state, notably connecting to major commercial and employment centers both within the state and in the adjacent major cities of New York and Philadelphia.
Covering a service area of 5,325 square miles (13,790 km2), NJT is the largest statewide public transit system and the third largest provider of bus, rail, and light rail transit by ridership in the United States, linking major points in New Jersey, New York, and Pennsylvania.
NJT also acts as a purchasing agency for many private operators in New Jersey, with numerous private operators receiving equipment from NJT (primarily buses) for route service within the state not controlled by NJT.
Covering a service area of 5,325 square miles (13,790 km2), NJT is the largest statewide public transit system and the third largest provider of bus, rail, and light rail transit by ridership in the United States, linking major points in New Jersey, New York, and Pennsylvania.
NJT also acts as a purchasing agency for many private operators in New Jersey, with numerous private operators receiving equipment from NJT (primarily buses) for route service within the state not controlled by NJT.
Brand/Importer Information: In 1924 Stephan Schaffan, Sr. founded the Atlas Tool Company in Newark, New Jersey. In 1933 his son, Stephan Schaffan, Jr., came to work for his father at the age of sixteen. Steve Jr. built model airplanes as a hobby and frequented a local hobby shop. Being an enterprising young man, he would often ask the owner if there was anything he could do to earn some extra spending money. Tired of listening to his requests, the hobby-store owner threw some model railroad track parts his way and said, "Here, see if you can improve on this".
In those days, railroad modelers had to assemble and build everything from scratch. Steve Jr. created a "switch kit" which sold so well, that the entire family worked on them in the basement at night, while doing business as usual in the machine shop during the day.
Subsequently, Steve Jr. engineered the stapling of rail to fiber track, along with inventing the first practical rail joiner and pre-assembled turnouts and flexible track. All of these products, and more, helped to popularize model railroading and assisted in the creation of a mass-market hobby. The budding entrepreneur quickly outgrew the limitations of a basement and small garage operation. Realizing they could actually make a living selling track and related products, Steve and his father had the first factory built in Hillside, New Jersey at 413 Florence Avenue in 1947. On September 30, 1949, the Atlas Tool Company was officially incorporated as a New Jersey company.
In 1985, Steve was honored posthumously for his inventions by the Model Railroad Industry Association and was inducted into the Model Railroad Industry Hall of Fame in Baltimore, Maryland. In addition, Steve was nominated and entered into the National Model Railroad Association Pioneers of Model Railroading in 1995.
In the early 1990s, the Atlas Tool Company changed its name to Atlas Model Railroad Company, Inc.
In those days, railroad modelers had to assemble and build everything from scratch. Steve Jr. created a "switch kit" which sold so well, that the entire family worked on them in the basement at night, while doing business as usual in the machine shop during the day.
Subsequently, Steve Jr. engineered the stapling of rail to fiber track, along with inventing the first practical rail joiner and pre-assembled turnouts and flexible track. All of these products, and more, helped to popularize model railroading and assisted in the creation of a mass-market hobby. The budding entrepreneur quickly outgrew the limitations of a basement and small garage operation. Realizing they could actually make a living selling track and related products, Steve and his father had the first factory built in Hillside, New Jersey at 413 Florence Avenue in 1947. On September 30, 1949, the Atlas Tool Company was officially incorporated as a New Jersey company.
In 1985, Steve was honored posthumously for his inventions by the Model Railroad Industry Association and was inducted into the Model Railroad Industry Hall of Fame in Baltimore, Maryland. In addition, Steve was nominated and entered into the National Model Railroad Association Pioneers of Model Railroading in 1995.
In the early 1990s, the Atlas Tool Company changed its name to Atlas Model Railroad Company, Inc.
Item created by: CMK on 2020-01-22 05:29:50. Last edited by Lethe on 2020-05-07 00:00:00
If you see errors or missing data in this entry, please feel free to log in and edit it. Anyone with a Gmail account can log in instantly.
If you see errors or missing data in this entry, please feel free to log in and edit it. Anyone with a Gmail account can log in instantly.